Pro Extension Reel

• 6.8mm heavy-duty yellow cable 200′
• Onscreen Distance Counter
• Adapter for 23mm Camera Head
• 6’/1.82m Connection Cord
• The Extension Reel is a 200′ 6.8mm heavy-duty yellow cable with a frame that is used with a Titan 3-Pro control box and 23mm camera head. (IT DOES NOT COME WITH A CONTROL BOX OR CAMERA HEAD!)
• This Extension Reel allows you to have two systems in one! This combination of a Titan 3-Pro & Pro Extension Reel gives you two reels with one interchangeable control system.
• The cable is the same diameter as the red heavy-duty cable but is stiffer to allow longer push distances. This cable is best used on 3″ or larger pipes.
• This Pro Extension Reel comes with an adapter that allows you to use your 23mm camera head. (This setup creates a double spring. Please see the picture.)
• The 38mm camera head does not need an adapter to screw on to the Extension Reel.
• The control box will mount on the Extension Reel and is connected by a 6’/1.82m connection cable. The meter counter will display as normal on the control box screen.

Keyboard: You will need to swap the Bluetooth keyboard components (including the dongle on the turntable) to use the keyboard with the Extension Reel. To make this process easier, a separate keyboard can be used for the Extension Reel. You can purchase a keyboard in our Spare Parts section.

This heavy-duty yellow cable is a diameter of 6.8 mm and is 200′ long. It comes with an adapter for a 23mm camera head and a 6′ connection cable to use with a Scout 3-Pro control box.

When used properly, the Scout 3-Pro Extension Reel can withstand the rough environments found in pipes. Any equipment used in these conditions is subject to damage occurring. You can minimize repairs by treating the camera system as a precision piece of equipment.

Do not force the push rod, if the camera has stopped moving and you continue to push/feed the cable into the pipe, the push rod cable can fold upon itself, if this occurs, damage to the fiberglass will occur. Sometimes the cable will kink or completely shear, other times underlying/hidden damage has occurred that will not be discovered until another use of the system.

Inspector Cameras LLC, provides a limited warranty as specified below to the first purchaser, that should any of its products prove to be defective in materials or workmanship during normal use, within one (1) year from the date of purchase; Inspector Cameras LLC, will, at its exclusive option, repair, replace or exchange the product or any of its parts with new, remanufactured or functional similar components.

What is Not Covered:
Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. Inspector Cameras LLC shall not be responsible for any incidental or consequential damages resulting from the loss of any use of the camera system.

Our camera systems are used on job sites in the most demanding applications and environments. Under these conditions, the camera system will experience normal wear and tear and likely require maintenance repair service. While normal wear & tear is not considered a “defect” and is not covered by the Limited Warranty, it is our goal to get your camera system back in service a soon as possible. Inspector Cameras LLC offers service, parts and repair by factory trained technicians at our facility in New Hampshire to meet your service needs.

This warranty does not apply to any camera system or component which has been subjected to accident, negligence, alteration, abuse or misuse. Repair by anyone other than Inspector Cameras LLC or the use of or repair with any parts or components not supplied or furnished by Inspector Cameras LLC will void the limited warranty.

This warranty does not apply to flex springs, cable rod, LED light rings, o-rings, batteries, skids, or other parts, which are considered consumable. The replacement of these items is part of normal product maintenance.

Defects in Materials or Workmanship:
It is our experience that a product that fails prematurely due to a manufacturing defect in materials or workmanship, will generally do so very early in the product’s life cycle, often the first or second time the product is used. When returned for inspection, these products are generally found to still be in like new condition and show very little signs of use. It is uncommon for a product that was manufactured with a defect, to function under normal use for more than an initial short period of time. Products that are returned for warranty inspection after previous successful usage are rarely found to have defects in materials or workmanship. The most common demand for service is the result of normal maintenance or wear and tear issues, which are not considered to be a defect in materials or workmanship.

All transportation charges to and from our location for warranty or service work will be the responsibility of the purchaser. Any damage and loss incurred in connection with the transportation of the camera system or individual components shall be borne by the purchaser.

No other warranties, guarantees, or liabilities, either implied or expressed, will be the responsibility of Inspector Cameras LLC.

Inspector Cameras LLC will, at its option, repair or replace without charge to the original purchaser, any part or parts manufactured by it and found, upon examination, to be DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP if received for such examination within the stated warranty period, which begins on the date of original purchase.

Return Policy
A camera system is returnable only under the following conditions: The camera must be returned unused in brand new condition with all packaging and manuals included. A used camera is not returnable. A decision to return the camera must be approved by Inspector Cameras LLC and we will issue a return authorization number. A camera can only be returned in the first 15 days after initial delivery. A 10% restocking fee will apply to all returned equipment.